Worktop Accessories

250ml

500ml

1000ml

A micro-fibre cleaning system which does not contain any chemicals. Used with water this cleaning system provides a smear-free finish every time. Simply wipe over with damp general purpose cloth and dry with the polishing cloth. Removes smears and finger marks on granite, stainless steel, glass, plastic, chrome and brass.

worksurface aftercare kit contains
maintenance guide
250ml oil
5 de-nibbing pads
1 cloth

A worktop after care kit for solid timber worktops. It consists of 250ml Danish oil, 5 de-nibbing pads, a cloth and an after care guide.

An essential worksurface accessory. Supplied as 2 parts with the tray either insert or recessed into the worksurface and the scales positioned in the tray. This allows easy removal for cleaning. Scales provide both metric and imperial weighing facility. Suitable for use in granite, composite stone and timber.

Easy to remove
Can weigh directly onto scales or use a bowl
High capacity: 9lb 15.8oz or 5kg
5 year guarantee
Diamentions: Tray 210mm x 210mm, scales 185mm x 185mm x 30mm

These functional stainless steel hotrods protect worksurfaces from hot pans, 300mm long they sit in a 3mm recess. Sutiable for granite, composite stone or timber worksurfaces
300 * 12mm stainless steel

Sold separately

Protect your worksurface from hot or warm pans with a stainless steel hot plate. Can be inserted into granite or timber worksurfaces. 20mm radius corners.

Diamensions 450 x 350mm

Useful worktop saving device for hot pans.

Chrome plated

Every cook should have one of these stylish solid beech chopping boards. 50mm thick. Features finger grooves on the side for easy lifting.

450 x 450 x 50mm beech

Every cook should have one of these stylish solid beech chopping boards. 50mm thick.

400mm diameter x 50mm beech

Product Information : -

The Quadrout is a versatile worktop jig that can be used for;
Right and left standard 90 and 45 degree joints
Right and left 90 degree joints where walls are up to 1.5 out of square (28mm
over 1m)
Rout recessess for worktop connecting bolts
Cutting/routing worktops from 400mm to 900mm wide

Specification Sheet

Product Information : -

Hot rod jig featuring 3 purpose made grooves which will produce recesses for 300mm, 200mm and 100mm long hot rods. An additional feature is 3 sets of peg holes allowing the jig to be positioned accurately so that the grooves run at 90 degree to the worktop edges

Note - this item requires a 12.7mm dia. router bit, not 12mm as stated in the original instructions. (May 2006)

Specification Sheet

Product Information : -

A sloping drainer groove jig for the successful routing of sloping drainage grooves in a natural wood or stone worktop.

Specification Sheet